Hotline             020-8831558
广东森之富实业有限责任公司
Back to the top
Product Products
Recommended products TRANSLATE More>
·产品结构:离型层、保护层、底色层、装饰层、热熔胶层等构成。·产品特点:具有附着力强、光泽度高、图文清晰、层次分明、套色精准、形象逼真以及耐磨、耐刮、耐热、耐晒、耐溶剂等特点。
Release time: 2016 - 06 - 06
Use method (for example) (1) according to the size of the transfer line is small, the cutting of the UV transfer film is placed in a fixed position on the production machine. (2) by rotating the wheel will transfer film and transfer lines to be straightened and covered on its surface to align. (3) adjust the transfer temperature, pressure, speed, through the heating pressure to transfer the transfer film on the pattern layer can be completely transferred to the surface of the line. (usually 160 - 180 DEG transfer temperature, pressure of 6 - kg/cm, the specific value based on the actual production needs.). (4) after the completion of the transfer process of cooling, cleaning, tearing off the surface of the film can be.
Product structure: a release layer, color layer, decorative layer, hot melt adhesive. And product features: with strong adhesion, high gloss, graphic clear, distinct, color accurate, vivid image, characteristics.
Release time: 2016 - 06 - 08
Use method (for example) (1) to do a good job in the whole door, surface grinding smooth, clean, and then evenly sprayed plastic special water soluble glue, especially groove, process and the door to spray and uniform, are in place to ensure the integrity of the transfer. (2) the glue surface slightly dry after blister, generally within a five hour plastic effect and taste, should not be placed too long, so as not to affect the sticky glue. According to the requirements of the transfer, the temperature is generally controlled at 160 degrees - 180 degrees, the warm-up time is generally set at about 20 seconds, plastic time is about 45 seconds. (3) transfer, tear off the surface of the transfer printing film and in the door on the other side of the spray glue an...
·产品结构:离型层、保护层、底色层、装饰层、热熔胶层等构成。·产品特点:具有附着力强、光泽度高、图文清晰、层次分明、套色精准、形象逼真以及耐磨、耐刮、耐热、耐晒、耐溶剂等特点。
Release time: 2016 - 06 - 07
Use method (for example) (1) according to the size of the transfer line is small, the cutting of the UV transfer film is placed in a fixed position on the production machine. (2) by rotating the wheel will transfer film and transfer lines to be straightened and covered on its surface to align. (3) adjust the transfer temperature, pressure, speed, through the heating pressure to transfer the transfer film on the pattern layer can be completely transferred to the surface of the line. (usually 160 - 180 DEG transfer temperature, pressure of 6 - kg/cm, the specific value based on the actual production needs.). (4) after the completion of the transfer process of cooling, cleaning, tearing off the surface of the film can be.
Wood grain series
  • RMB 0
    Member price 0
    Market value 0
    Use method (for example) (1) according to the size of the transfer line is small, the cutting of the UV transfer film is placed in a fixed position on the production machine. (2) by rotating the wheel will transfer film and transfer lines to be straightened and covered on its surface to align. (3) adjust the transfer temperature, pressure, speed, through the heating pressure to transfer the transfer film on the pattern layer can be completely transferred to the surface of the line. (usually 160 - 180 DEG transfer temperature, pressure of 6 - kg/cm, the specific value based on the actual production needs.). (4) after the completion of the transfer process of cooling, cleaning, tearing off the surface of the film can be.
  • RMB 0
    Member price 0
    Market value 0
    Use method (for example) (1) to do a good job in the whole door, surface grinding smooth, clean, and then evenly sprayed plastic special water soluble glue, especially groove, process and the door to spray and uniform, are in place to ensure the integrity of the transfer. (2) the glue surface slightly dry after blister, generally within a five hour plastic effect and taste, should not be placed too long, so as not to affect the sticky glue. According to the requirements of the transfer, the temperature is generally controlled at 160 degrees - 180 degrees, the warm-up time is generally set at about 20 seconds, plastic time is about 45 seconds. (3) transfer, tear off the surface of the transfer printing film and in the door on the other side of the spray glue and then transfer, especially on both sides of the door, glue must uniform and spraying in place, ensure the integrity of the transfer by the side of the door. (4) after the completion of the whole door transfer, if some transfer is not in place or because of the tear film caused by improper transfer film texture loss, in the re spray glue, paste piece of transfer film, with irons, heated towel transfer, then can be torn out. (5) well after the transfer, bottom made of Pu primer, primer to be dry, surface polishing treatment, then PU paint, color repair or direct spray can be.
  • RMB 0
    Member price 0
    Market value 0
    Use method (for example) (1) to do a good job in the whole door, surface grinding smooth, clean, and then evenly sprayed plastic special water soluble glue, especially groove, process and the door to spray and uniform, are in place to ensure the integrity of the transfer. (2) the glue surface slightly dry after blister, generally within a five hour plastic effect and taste, should not be placed too long, so as not to affect the sticky glue. According to the requirements of the transfer, the temperature is generally controlled at 160 degrees - 180 degrees, the warm-up time is generally set at about 20 seconds, plastic time is about 45 seconds. (3) transfer, tear off the surface of the transfer printing film and in the door on the other side of the spray glue and then transfer, especially on both sides of the door, glue must uniform and spraying in place, ensure the integrity of the transfer by the side of the door. (4) after the completion of the whole door transfer, if some transfer is not in place or because of the tear film caused by improper transfer film texture loss, in the re spray glue, paste piece of transfer film, with irons, heated towel transfer, then can be torn out. (5) well after the transfer, bottom made of Pu primer, primer to be dry, surface polishing treatment, then PU paint, color repair or direct spray can be.
  • RMB 0
    Member price 0
    Market value 0
    Use method (for example) (1) according to the size of the transfer line is small, the cutting of the UV transfer film is placed in a fixed position on the production machine. (2) by rotating the wheel will transfer film and transfer lines to be straightened and covered on its surface to align. (3) adjust the transfer temperature, pressure, speed, through the heating pressure to transfer the transfer film on the pattern layer can be completely transferred to the surface of the line. (usually 160 - 180 DEG transfer temperature, pressure of 6 - kg/cm, the specific value based on the actual production needs.). (4) after the completion of the transfer process of cooling, cleaning, tearing off the surface of the film can be.
  • RMB 0
    Member price 0
    Market value 0
    Use method (for example) (1) according to the size of the transfer line is small, the cutting of the UV transfer film is placed in a fixed position on the production machine. (2) by rotating the wheel will transfer film and transfer lines to be straightened and covered on its surface to align. (3) adjust the transfer temperature, pressure, speed, through the heating pressure to transfer the transfer film on the pattern layer can be completely transferred to the surface of the line. (usually 160 - 180 DEG transfer temperature, pressure of 6 - kg/cm, the specific value based on the actual production needs.). (4) after the completion of the transfer process of cooling, cleaning, tearing off the surface of the film can be.
  • RMB 0
    Member price 0
    Market value 0
    Use method (for example) (1) to do a good job in the whole door, surface grinding smooth, clean, and then evenly sprayed plastic special water soluble glue, especially groove, process and the door to spray and uniform, are in place to ensure the integrity of the transfer. (2) the glue surface slightly dry after blister, generally within a five hour plastic effect and taste, should not be placed too long, so as not to affect the sticky glue. According to the requirements of the transfer, the temperature is generally controlled at 160 degrees - 180 degrees, the warm-up time is generally set at about 20 seconds, plastic time is about 45 seconds. (3) transfer, tear off the surface of the transfer printing film and in the door on the other side of the spray glue and then transfer, especially on both sides of the door, glue must uniform and spraying in place, ensure the integrity of the transfer by the side of the door. (4) after the completion of the whole door transfer, if some transfer is not in place or because of the tear film caused by improper transfer film texture loss, in the re spray glue, paste piece of transfer film, with irons, heated towel transfer, then can be torn out. (5) well after the transfer, bottom made of Pu primer, primer to be dry, surface polishing treatment, then PU paint, color repair or direct spray can be.
  • RMB 0
    Member price 0
    Market value 0
    Use method (for example) (1) according to the size of the transfer line is small, the cutting of the UV transfer film is placed in a fixed position on the production machine. (2) by rotating the wheel will transfer film and transfer lines to be straightened and covered on its surface to align. (3) adjust the transfer temperature, pressure, speed, through the heating pressure to transfer the transfer film on the pattern layer can be completely transferred to the surface of the line. (usually 160 - 180 DEG transfer temperature, pressure of 6 - kg/cm, the specific value based on the actual production needs.). (4) after the completion of the transfer process of cooling, cleaning, tearing off the surface of the film can be.
  • RMB 0
    Member price 0
    Market value 0
    Use method (for example) (1) to do a good job in the whole door, surface grinding smooth, clean, and then evenly sprayed plastic special water soluble glue, especially groove, process and the door to spray and uniform, are in place to ensure the integrity of the transfer. (2) the glue surface slightly dry after blister, generally within a five hour plastic effect and taste, should not be placed too long, so as not to affect the sticky glue. According to the requirements of the transfer, the temperature is generally controlled at 160 degrees - 180 degrees, the warm-up time is generally set at about 20 seconds, plastic time is about 45 seconds. (3) transfer, tear off the surface of the transfer printing film and in the door on the other side of the spray glue and then transfer, especially on both sides of the door, glue must uniform and spraying in place, ensure the integrity of the transfer by the side of the door. (4) after the completion of the whole door transfer, if some transfer is not in place or because of the tear film caused by improper transfer film texture loss, in the re spray glue, paste piece of transfer film, with irons, heated towel transfer, then can be torn out. (5) well after the transfer, bottom made of Pu primer, primer to be dry, surface polishing treatment, then PU paint, color repair or direct spray can be.
  • RMB 0
    Member price 0
    Market value 0
    Use method (for example) (1) to do a good job in the whole door, surface grinding smooth, clean, and then evenly sprayed plastic special water soluble glue, especially groove, process and the door to spray and uniform, are in place to ensure the integrity of the transfer. (2) the glue surface slightly dry after blister, generally within a five hour plastic effect and taste, should not be placed too long, so as not to affect the sticky glue. According to the requirements of the transfer, the temperature is generally controlled at 160 degrees - 180 degrees, the warm-up time is generally set at about 20 seconds, plastic time is about 45 seconds. (3) transfer, tear off the surface of the transfer printing film and in the door on the other side of the spray glue and then transfer, especially on both sides of the door, glue must uniform and spraying in place, ensure the integrity of the transfer by the side of the door. (4) after the completion of the whole door transfer, if some transfer is not in place or because of the tear film caused by improper transfer film texture loss, in the re spray glue, paste piece of transfer film, with irons, heated towel transfer, then can be torn out. (5) well after the transfer, bottom made of Pu primer, primer to be dry, surface polishing treatment, then PU paint, color repair or direct spray can be.
  • RMB 0
    Member price 0
    Market value 0
    Use method (for example) (1) according to the size of the transfer line is small, the cutting of the UV transfer film is placed in a fixed position on the production machine. (2) by rotating the wheel will transfer film and transfer lines to be straightened and covered on its surface to align. (3) adjust the transfer temperature, pressure, speed, through the heating pressure to transfer the transfer film on the pattern layer can be completely transferred to the surface of the line. (usually 160 - 180 DEG transfer temperature, pressure of 6 - kg/cm, the specific value based on the actual production needs.). (4) after the completion of the transfer process of cooling, cleaning, tearing off the surface of the film can be.
  • RMB 0
    Member price 0
    Market value 0
    Use method (for example) (1) to do a good job in the whole door, surface grinding smooth, clean, and then evenly sprayed plastic special water soluble glue, especially groove, process and the door to spray and uniform, are in place to ensure the integrity of the transfer. (2) the glue surface slightly dry after blister, generally within a five hour plastic effect and taste, should not be placed too long, so as not to affect the sticky glue. According to the requirements of the transfer, the temperature is generally controlled at 160 degrees - 180 degrees, the warm-up time is generally set at about 20 seconds, plastic time is about 45 seconds. (3) transfer, tear off the surface of the transfer printing film and in the door on the other side of the spray glue and then transfer, especially on both sides of the door, glue must uniform and spraying in place, ensure the integrity of the transfer by the side of the door. (4) after the completion of the whole door transfer, if some transfer is not in place or because of the tear film caused by improper transfer film texture loss, in the re spray glue, paste piece of transfer film, with irons, heated towel transfer, then can be torn out. (5) well after the transfer, bottom made of Pu primer, primer to be dry, surface polishing treatment, then PU paint, color repair or direct spray can be.
  • RMB 0
    Member price 0
    Market value 0
    Use method (for example) (1) according to the size of the transfer line is small, the cutting of the UV transfer film is placed in a fixed position on the production machine. (2) by rotating the wheel will transfer film and transfer lines to be straightened and covered on its surface to align. (3) adjust the transfer temperature, pressure, speed, through the heating pressure to transfer the transfer film on the pattern layer can be completely transferred to the surface of the line. (usually 160 - 180 DEG transfer temperature, pressure of 6 - kg/cm, the specific value based on the actual production needs.). (4) after the completion of the transfer process of cooling, cleaning, tearing off the surface of the film can be.
                      Range of the eastern industrial co., LTD
犀牛云提供企业云服务
Address:The self-made 55 China guangzhou huadu district jinghu avenue
Telephone:+86 0755-2955 6666
Fax:+86 0755-2788 8009
Zip code:330520