Application: apply on the glass board, melamine board, ceramics, cement board, fiber board, density board, PVC stone plastic, PVC foam board, PS foam line, aluminum, iron, stainless steel and other metal materials, cloth, leather and other materials. Product structure: a release layer, color layer, decorative layer, hot melt adhesive. And product features: with strong adhesion, high gloss, graphic clear, distinct, color accurate, vivid image, characteristics.
Release time:
2016
-
06
-
08
Use method (for example) (1) to do a good job in the whole door, surface grinding smooth, clean, and then evenly sprayed plastic special water soluble glue, especially groove, process and the door to spray and uniform, are in place to ensure the integrity of the transfer. (2) the glue surface slightly dry after blister, generally within a five hour plastic effect and taste, should not be placed too long, so as not to affect the sticky glue. According to the requirements of the transfer, the temperature is generally controlled at 160 degrees - 180 degrees, the warm-up time is generally set at about 20 seconds, plastic time is about 45 seconds. (3) transfer, tear off the surface of the transfer printing film and in the door on the other side of the spray glue and then transfer, especially on...